⟁ North Carolina Well Data field records · 2026 survey

North Carolina Well Data › Anson County

Anson County, North Carolina: well depth, water level & drilling cost

✓ 392 NC DEQ + USGS records · verified 2026-10-12

186 ftmedian well depth
95 ft–309 fttypical depth range
30 ftmedian static water level
10 gpmmedian yield (198 tests)

Pull every recorded well near a Anson County address — $49

How deep are wells in Anson County, North Carolina?

The median drilled well depth in Anson County is 186 ft, based on 392 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 95 ft and 309 ft; 90% are shallower than 400 ft. Wells drilled since 2016 have a median depth of 325 ft.

How much does it cost to drill a well in Anson County?

Applying published per-foot rates to the local median depth of 186 ft: drilling and casing alone typically runs $4,650–$12,090; a complete system including pump, pressure tank, and hookup typically runs $11,160–$18,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Anson County?

The median static water level is 30 ft below ground surface (middle half of wells: 25 ft–40 ft), from 206 measurements.

How much water do wells in Anson County produce?

The median tested yield is 10 gpm (middle half: 5 gpm–30 gpm), from 198 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 31 50–100 ft 75 100–150 ft 58 150–200 ft 37 200–300 ft 60 300–400 ft 56 400–600 ft 66 600+ ft 9

Who drills wells in Anson County?

DrillerWells since 2016
FRANKIE L. OLIVER17
FRANKIE L OLIVER15
DWIGHT L HUNEYCUTT10
WARD V CARPENTER9
WARD V. CARPENTER8
Dwight L. Huneycutt7
JEFFERY TUCKER7
Frankie L. Oliver6

See every driller with wells on record in Anson County, ranked →

Get quotes from local drillers

Looking at a specific property in Anson County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Anson County

Free. Goes to licensed drillers working Anson County.

Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.