North Carolina Well Data › Bladen County
Bladen County, North Carolina: well depth, water level & drilling cost
✓ 718 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Bladen County address — $49
How deep are wells in Bladen County, North Carolina?
The median drilled well depth in Bladen County is 125 ft, based on 717 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 76 ft and 195 ft; 90% are shallower than 291 ft. Wells drilled since 2016 have a median depth of 159 ft.
How much does it cost to drill a well in Bladen County?
Applying published per-foot rates to the local median depth of 125 ft: drilling and casing alone typically runs $3,125–$8,125; a complete system including pump, pressure tank, and hookup typically runs $7,500–$12,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Bladen County?
The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–32 ft), from 529 measurements.
How much water do wells in Bladen County produce?
The median tested yield is 20 gpm (middle half: 12 gpm–50 gpm), from 543 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Bladen County?
| Driller | Wells since 2016 |
|---|---|
| JONATHAN KAMIONKA | 11 |
| RONALD G. CANNADY | 7 |
| Jonathan Kamionka | 7 |
| HUGO RIVAS | 6 |
| LLOYD MARES | 5 |
| Hugo Rivas | 4 |
| Ronald G. Cannady | 4 |
| Arthur Cannady | 3 |
See every driller with wells on record in Bladen County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bladen County.
Well records by ZIP code in Bladen County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Tar Heel (28392) — 101 wells, median 130 ft
- Elizabethtown (28337) — 73 wells, median 198 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.