North Carolina Well Data › Edgecombe County
Edgecombe County, North Carolina: well depth, water level & drilling cost
✓ 983 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Edgecombe County address — $49
How deep are wells in Edgecombe County, North Carolina?
The median drilled well depth in Edgecombe County is 70 ft, based on 982 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 38 ft and 128 ft; 90% are shallower than 200 ft. Wells drilled since 2016 have a median depth of 135 ft.
How much does it cost to drill a well in Edgecombe County?
Applying published per-foot rates to the local median depth of 70 ft: drilling and casing alone typically runs $1,750–$4,550; a complete system including pump, pressure tank, and hookup typically runs $4,200–$7,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Edgecombe County?
The median static water level is 19 ft below ground surface (middle half of wells: 12 ft–32 ft), from 886 measurements.
How much water do wells in Edgecombe County produce?
The median tested yield is 10 gpm (middle half: 7 gpm–25 gpm), from 881 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Edgecombe County?
| Driller | Wells since 2016 |
|---|---|
| Sammy Rackley | 7 |
| DAVID COOK | 3 |
| DAVID F COOK | 2 |
| SAMMY RACKLEY | 2 |
| DAVID F. COOK | 1 |
| DAVID FOSTER COOK | 1 |
| Lawrence D. Opper | 1 |
See every driller with wells on record in Edgecombe County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Edgecombe County.
Well records by ZIP code in Edgecombe County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Conetoe (27819) — 54 wells, median 20 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.