⟁ North Carolina Well Data field records · 2026 survey

North Carolina Well Data › Franklin County

Franklin County, North Carolina: well depth, water level & drilling cost

✓ 3,115 NC DEQ + USGS records · verified 2026-10-12

225 ftmedian well depth
180 ft–305 fttypical depth range
25 ftmedian static water level
10 gpmmedian yield (2,870 tests)

Pull every recorded well near a Franklin County address — $49

How deep are wells in Franklin County, North Carolina?

The median drilled well depth in Franklin County is 225 ft, based on 3,107 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 180 ft and 305 ft; 90% are shallower than 420 ft. Wells drilled since 2016 have a median depth of 240 ft.

How much does it cost to drill a well in Franklin County?

Applying published per-foot rates to the local median depth of 240 ft: drilling and casing alone typically runs $6,000–$15,600; a complete system including pump, pressure tank, and hookup typically runs $14,400–$24,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Franklin County?

The median static water level is 25 ft below ground surface (middle half of wells: 20 ft–30 ft), from 2,653 measurements.

How much water do wells in Franklin County produce?

The median tested yield is 10 gpm (middle half: 5 gpm–15 gpm), from 2,870 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 22 50–100 ft 75 100–150 ft 346 150–200 ft 599 200–300 ft 1,074 300–400 ft 539 400–600 ft 376 600+ ft 76

Who drills wells in Franklin County?

DrillerWells since 2016
JERRY BALL248
FELTON JACOBS207
LANDON PHILLIPS104
NICK YOUNG56
DUSTIN LETCHWORTH35
JASON POOLE34
Chauncey Leggett32
Jerry Ball22

See every driller with wells on record in Franklin County, ranked →

Get quotes from local drillers

Looking at a specific property in Franklin County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Franklin County

Free. Goes to licensed drillers working Franklin County.

Well records by ZIP code in Franklin County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.