North Carolina Well Data › Graham County
Graham County, North Carolina: well depth, water level & drilling cost
✓ 1,184 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Graham County address — $49
How deep are wells in Graham County, North Carolina?
The median drilled well depth in Graham County is 280 ft, based on 1,184 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 200 ft and 405 ft; 90% are shallower than 605 ft. Wells drilled since 2016 have a median depth of 305 ft.
How much does it cost to drill a well in Graham County?
Applying published per-foot rates to the local median depth of 305 ft: drilling and casing alone typically runs $7,625–$19,825; a complete system including pump, pressure tank, and hookup typically runs $18,300–$30,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Graham County?
The median static water level is 45 ft below ground surface (middle half of wells: 20 ft–80 ft), from 1,066 measurements.
How much water do wells in Graham County produce?
The median tested yield is 10 gpm (middle half: 4 gpm–20 gpm), from 1,080 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Graham County?
| Driller | Wells since 2016 |
|---|---|
| KALEB T HYDE | 47 |
| KALEB T. HYDE | 18 |
| WILLIAM LAWSON | 7 |
| Kaleb T. Hyde | 6 |
| Perry Reece | 5 |
| PERRY REECE | 5 |
| James Daniel Wilson | 3 |
| W. DALTON SNODGRASS | 3 |
See every driller with wells on record in Graham County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Graham County.
Well records by ZIP code in Graham County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Robbinsville (28771) — 175 wells, median 300 ft
- Fontana Dam (28733) — 138 wells, median 373 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.