North Carolina Well Data › Granville County
Granville County, North Carolina: well depth, water level & drilling cost
✓ 2,533 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Granville County address — $49
How deep are wells in Granville County, North Carolina?
The median drilled well depth in Granville County is 245 ft, based on 2,526 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 180 ft and 345 ft; 90% are shallower than 485 ft. Wells drilled since 2016 have a median depth of 300 ft.
How much does it cost to drill a well in Granville County?
Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Granville County?
The median static water level is 30 ft below ground surface (middle half of wells: 25 ft–30 ft), from 2,043 measurements.
How much water do wells in Granville County produce?
The median tested yield is 8 gpm (middle half: 4 gpm–15 gpm), from 2,260 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Granville County?
| Driller | Wells since 2016 |
|---|---|
| FELTON JACOBS | 53 |
| Bradley Deming | 47 |
| JOHN OFTEN | 31 |
| LANDON PHILLIPS | 30 |
| JEFFERY T STEPHENSON | 27 |
| JEFFREY T. STEPHENSON | 19 |
| BLAKE SANFORD | 19 |
| PHILIP R HENSLEY | 15 |
See every driller with wells on record in Granville County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Granville County.
Well records by ZIP code in Granville County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Creedmoor (27522) — 326 wells, median 345 ft
- Oxford (27565) — 247 wells, median 244 ft
- Stem (27581) — 173 wells, median 265 ft
- Stovall (27582) — 112 wells, median 200 ft
- Bullock (27507) — 88 wells, median 183 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.