North Carolina Well Data › Greene County
Greene County, North Carolina: well depth, water level & drilling cost
✓ 220 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Greene County address — $49
How deep are wells in Greene County, North Carolina?
The median drilled well depth in Greene County is 60 ft, based on 220 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 18 ft and 165 ft; 90% are shallower than 325 ft. Wells drilled since 2016 have a median depth of 142 ft.
How much does it cost to drill a well in Greene County?
Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Greene County?
The median static water level is 30 ft below ground surface (middle half of wells: 15 ft–113 ft), from 83 measurements.
How much water do wells in Greene County produce?
The median tested yield is 40 gpm (middle half: 25 gpm–75 gpm), from 81 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Greene County?
| Driller | Wells since 2016 |
|---|---|
| David L. Register | 4 |
| Sean Cropsey | 4 |
| JONATHAN KAMIONA | 3 |
| Matthew W. Cunningham | 1 |
| LLOYD MARES | 1 |
| Matthew Wayne Cunningham | 1 |
| Lloyd Mares | 1 |
| JONATHAN KAMIONKA | 1 |
See every driller with wells on record in Greene County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Greene County.
Well records by ZIP code in Greene County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Maury (28554) — 111 wells, median 22 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.