⟁ North Carolina Well Data field records · 2026 survey

North Carolina Well Data › Harnett County

Harnett County, North Carolina: well depth, water level & drilling cost

✓ 409 NC DEQ + USGS records · verified 2026-10-12

200 ftmedian well depth
56 ft–300 fttypical depth range
20 ftmedian static water level
11 gpmmedian yield (343 tests)

Pull every recorded well near a Harnett County address — $49

How deep are wells in Harnett County, North Carolina?

The median drilled well depth in Harnett County is 200 ft, based on 409 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 56 ft and 300 ft; 90% are shallower than 376 ft. Wells drilled since 2016 have a median depth of 184 ft.

How much does it cost to drill a well in Harnett County?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Harnett County?

The median static water level is 20 ft below ground surface (middle half of wells: 15 ft–40 ft), from 333 measurements.

How much water do wells in Harnett County produce?

The median tested yield is 11 gpm (middle half: 7 gpm–25 gpm), from 343 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 93 50–100 ft 24 100–150 ft 29 150–200 ft 47 200–300 ft 110 300–400 ft 68 400–600 ft 34 600+ ft 4

Who drills wells in Harnett County?

DrillerWells since 2016
LARRY WILLIFORD, JR20
JONATHAN KAMIONKA11
JASON POOLE7
LANDON PHILLIPS5
NICK YOUNG4
FELTON JACOBS3
JON POOLE2
Larry Williford Jr2

See every driller with wells on record in Harnett County, ranked →

Get quotes from local drillers

Looking at a specific property in Harnett County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Harnett County

Free. Goes to licensed drillers working Harnett County.

Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.