North Carolina Well Data › Hoke County
Hoke County, North Carolina: well depth, water level & drilling cost
✓ 530 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Hoke County address — $49
How deep are wells in Hoke County, North Carolina?
The median drilled well depth in Hoke County is 95 ft, based on 527 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 76 ft and 116 ft; 90% are shallower than 140 ft. Wells drilled since 2016 have a median depth of 92 ft.
How much does it cost to drill a well in Hoke County?
Applying published per-foot rates to the local median depth of 95 ft: drilling and casing alone typically runs $2,375–$6,175; a complete system including pump, pressure tank, and hookup typically runs $5,700–$9,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Hoke County?
The median static water level is 35 ft below ground surface (middle half of wells: 20 ft–46 ft), from 402 measurements.
How much water do wells in Hoke County produce?
The median tested yield is 20 gpm (middle half: 12 gpm–30 gpm), from 416 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Hoke County?
| Driller | Wells since 2016 |
|---|---|
| LARRY WILLIFORD, JR | 13 |
| JONATHAN KAMIONKA | 8 |
| JASON W. PENDLEY | 6 |
| JASON W PENDLEY | 5 |
| Jonathan Kamionka | 1 |
| RUSSELL D. UNDERWOOD | 1 |
| LARRY WILLIFORD JR | 1 |
| Larry Williford Jr | 1 |
See every driller with wells on record in Hoke County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Hoke County.
Well records by ZIP code in Hoke County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Raeford (28376) — 105 wells, median 106 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.