North Carolina Well Data › Hyde County
Hyde County, North Carolina: well depth, water level & drilling cost
✓ 190 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Hyde County address — $49
How deep are wells in Hyde County, North Carolina?
The median drilled well depth in Hyde County is 113 ft, based on 190 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 70 ft and 169 ft; 90% are shallower than 275 ft. Wells drilled since 2016 have a median depth of 120 ft.
How much does it cost to drill a well in Hyde County?
Applying published per-foot rates to the local median depth of 113 ft: drilling and casing alone typically runs $2,825–$7,345; a complete system including pump, pressure tank, and hookup typically runs $6,780–$11,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Hyde County?
The median static water level is 8 ft below ground surface (middle half of wells: 4 ft–12 ft), from 62 measurements.
How much water do wells in Hyde County produce?
The median tested yield is 25 gpm (middle half: 15 gpm–50 gpm), from 61 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Hyde County?
| Driller | Wells since 2016 |
|---|---|
| Roger Hudson | 8 |
| JOSH RESPESS | 6 |
| Josh Repess | 4 |
| DAVID CAST MANNING | 1 |
| JOSH REPESS | 1 |
| Josh Respess | 1 |
| DAVID COOK | 1 |
| David Lewis | 1 |
See every driller with wells on record in Hyde County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Hyde County.
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.