North Carolina Well Data › Mitchell County
Mitchell County, North Carolina: well depth, water level & drilling cost
✓ 1,084 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Mitchell County address — $49
How deep are wells in Mitchell County, North Carolina?
The median drilled well depth in Mitchell County is 305 ft, based on 1,083 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 200 ft and 465 ft; 90% are shallower than 700 ft. Wells drilled since 2016 have a median depth of 365 ft.
How much does it cost to drill a well in Mitchell County?
Applying published per-foot rates to the local median depth of 365 ft: drilling and casing alone typically runs $9,125–$23,725; a complete system including pump, pressure tank, and hookup typically runs $21,900–$36,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Mitchell County?
The median static water level is 45 ft below ground surface (middle half of wells: 20 ft–70 ft), from 843 measurements.
How much water do wells in Mitchell County produce?
The median tested yield is 8 gpm (middle half: 3 gpm–20 gpm), from 900 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Mitchell County?
| Driller | Wells since 2016 |
|---|---|
| REX MEADOWS | 62 |
| Gary Justice | 12 |
| GARY JUSTICE | 11 |
| Rex Meadows | 7 |
| RICHARD REESE | 6 |
| TAYLOR RAY BOGER | 2 |
| REX MEADOWS | 1 |
| GARRETT PADGETT | 1 |
See every driller with wells on record in Mitchell County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Mitchell County.
Well records by ZIP code in Mitchell County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Bakersville (28705) — 108 wells, median 305 ft
- Penland (28765) — 71 wells, median 305 ft
- Spruce Pine (28777) — 69 wells, median 405 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.