North Carolina Well Data › Pamlico County
Pamlico County, North Carolina: well depth, water level & drilling cost
✓ 241 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Pamlico County address — $49
How deep are wells in Pamlico County, North Carolina?
The median drilled well depth in Pamlico County is 190 ft, based on 241 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 76 ft and 240 ft; 90% are shallower than 350 ft. Wells drilled since 2016 have a median depth of 180 ft.
How much does it cost to drill a well in Pamlico County?
Applying published per-foot rates to the local median depth of 190 ft: drilling and casing alone typically runs $4,750–$12,350; a complete system including pump, pressure tank, and hookup typically runs $11,400–$19,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Pamlico County?
The median static water level is 13 ft below ground surface (middle half of wells: 8 ft–25 ft), from 49 measurements.
How much water do wells in Pamlico County produce?
The median tested yield is 60 gpm (middle half: 50 gpm–70 gpm), from 118 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Pamlico County?
| Driller | Wells since 2016 |
|---|---|
| MICHAEL HAGER | 71 |
| Mike Hager | 11 |
| MIke Hager | 3 |
| CONNOR CORDINGLEY | 2 |
| JOHN SWITZER | 2 |
| Jason P. Morton | 2 |
| Roger Hudson | 1 |
| Patrick Cahill | 1 |
See every driller with wells on record in Pamlico County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Pamlico County.
Well records by ZIP code in Pamlico County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Arapahoe (28510) — 51 wells, median 180 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.