North Carolina Well Data › Pasquotank County
Pasquotank County, North Carolina: well depth, water level & drilling cost
✓ 293 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Pasquotank County address — $49
How deep are wells in Pasquotank County, North Carolina?
The median drilled well depth in Pasquotank County is 65 ft, based on 293 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 38 ft and 86 ft; 90% are shallower than 100 ft. Wells drilled since 2016 have a median depth of 60 ft.
How much does it cost to drill a well in Pasquotank County?
Applying published per-foot rates to the local median depth of 65 ft: drilling and casing alone typically runs $1,625–$4,225; a complete system including pump, pressure tank, and hookup typically runs $3,900–$6,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Pasquotank County?
The median static water level is 8 ft below ground surface (middle half of wells: 6 ft–12 ft), from 178 measurements.
How much water do wells in Pasquotank County produce?
The median tested yield is 25 gpm (middle half: 20 gpm–40 gpm), from 210 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Pasquotank County?
| Driller | Wells since 2016 |
|---|---|
| RONALD KEETER, JR. | 34 |
| JOHN PAUL SIMPSON | 9 |
| PAUL LACHER SR | 4 |
| PAUL A. LACHER, SR | 2 |
| PAUL A LACHER SR | 2 |
| Paul Lacher, Sr. | 1 |
| P.G. WEST III | 1 |
| Paul Lacher Dr | 1 |
See every driller with wells on record in Pasquotank County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Pasquotank County.
Well records by ZIP code in Pasquotank County
Median depth, water level, and yield for each ZIP code with recorded wells.
- South Mills (27976) — 174 wells, median 46 ft
- Elizabeth City (27906) — 58 wells, median 65 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.