North Carolina Well Data › Perquimans County
Perquimans County, North Carolina: well depth, water level & drilling cost
✓ 197 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Perquimans County address — $49
How deep are wells in Perquimans County, North Carolina?
The median drilled well depth in Perquimans County is 77 ft, based on 197 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 50 ft and 100 ft; 90% are shallower than 140 ft. Wells drilled since 2016 have a median depth of 90 ft.
How much does it cost to drill a well in Perquimans County?
Applying published per-foot rates to the local median depth of 77 ft: drilling and casing alone typically runs $1,925–$5,005; a complete system including pump, pressure tank, and hookup typically runs $4,620–$7,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Perquimans County?
The median static water level is 9 ft below ground surface (middle half of wells: 8 ft–10 ft), from 147 measurements.
How much water do wells in Perquimans County produce?
The median tested yield is 30 gpm (middle half: 19 gpm–64 gpm), from 158 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Perquimans County?
| Driller | Wells since 2016 |
|---|---|
| P.G. WEST III | 12 |
| P.G. West, III | 11 |
| RONALD KEETER, JR. | 6 |
| PAUL A LACHER SR | 5 |
| Ronald E. Keeter, Jr. | 4 |
| Paul A. Lacher, Sr. | 3 |
| PAUL LACHER SR | 2 |
| Paul Lacher, Sr. | 2 |
See every driller with wells on record in Perquimans County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Perquimans County.
Well records by ZIP code in Perquimans County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Hertford (27944) — 95 wells, median 80 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.