North Carolina Well Data › Pitt County
Pitt County, North Carolina: well depth, water level & drilling cost
✓ 809 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Pitt County address — $49
How deep are wells in Pitt County, North Carolina?
The median drilled well depth in Pitt County is 150 ft, based on 804 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 70 ft and 273 ft; 90% are shallower than 385 ft. Wells drilled since 2016 have a median depth of 176 ft.
How much does it cost to drill a well in Pitt County?
Applying published per-foot rates to the local median depth of 176 ft: drilling and casing alone typically runs $4,400–$11,440; a complete system including pump, pressure tank, and hookup typically runs $10,560–$17,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Pitt County?
The median static water level is 24 ft below ground surface (middle half of wells: 12 ft–68 ft), from 595 measurements.
How much water do wells in Pitt County produce?
The median tested yield is 25 gpm (middle half: 15 gpm–50 gpm), from 592 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Pitt County?
| Driller | Wells since 2016 |
|---|---|
| JOSHUA EDMONDSON | 31 |
| TODD GWALTNEY | 29 |
| DAVID COOK | 17 |
| DAVID LEWIS | 9 |
| BRYAN MCLAWHORN | 9 |
| LLOYD MARES | 8 |
| DAVID FOSTER COOK | 6 |
| SEAN CROPSEY | 5 |
See every driller with wells on record in Pitt County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Pitt County.
Well records by ZIP code in Pitt County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Washington (27889) — 61 wells, median 95 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.