North Carolina Well Data › Robeson County
Robeson County, North Carolina: well depth, water level & drilling cost
✓ 743 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Robeson County address — $49
How deep are wells in Robeson County, North Carolina?
The median drilled well depth in Robeson County is 105 ft, based on 742 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 55 ft and 172 ft; 90% are shallower than 245 ft. Wells drilled since 2016 have a median depth of 89 ft.
How much does it cost to drill a well in Robeson County?
Applying published per-foot rates to the local median depth of 89 ft: drilling and casing alone typically runs $2,225–$5,785; a complete system including pump, pressure tank, and hookup typically runs $5,340–$8,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Robeson County?
The median static water level is 15 ft below ground surface (middle half of wells: 9 ft–25 ft), from 504 measurements.
How much water do wells in Robeson County produce?
The median tested yield is 20 gpm (middle half: 8 gpm–60 gpm), from 495 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Robeson County?
| Driller | Wells since 2016 |
|---|---|
| Eric Sanderson | 46 |
| ERIC SANDERSON | 31 |
| Travis Frazier | 27 |
| LARRY WILLIFORD, JR | 17 |
| BOBBY ALLRED II | 8 |
| JONATHAN KAMIONKA | 7 |
| Jonathan Kamionka | 5 |
| Bobby Lee Allred, II | 5 |
See every driller with wells on record in Robeson County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Robeson County.
Well records by ZIP code in Robeson County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Rowland (28383) — 70 wells, median 182 ft
- Maxton (28364) — 64 wells, median 160 ft
- Saint Pauls (28384) — 53 wells, median 79 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.