⟁ North Carolina Well Data field records · 2026 survey

North Carolina Well Data › Scotland County

Scotland County, North Carolina: well depth, water level & drilling cost

✓ 435 NC DEQ + USGS records · verified 2026-10-12

93 ftmedian well depth
74 ft–120 fttypical depth range
30 ftmedian static water level
12 gpmmedian yield (352 tests)

Pull every recorded well near a Scotland County address — $49

How deep are wells in Scotland County, North Carolina?

The median drilled well depth in Scotland County is 93 ft, based on 435 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 74 ft and 120 ft; 90% are shallower than 153 ft. Wells drilled since 2016 have a median depth of 90 ft.

How much does it cost to drill a well in Scotland County?

Applying published per-foot rates to the local median depth of 93 ft: drilling and casing alone typically runs $2,325–$6,045; a complete system including pump, pressure tank, and hookup typically runs $5,580–$9,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Scotland County?

The median static water level is 30 ft below ground surface (middle half of wells: 20 ft–38 ft), from 347 measurements.

How much water do wells in Scotland County produce?

The median tested yield is 12 gpm (middle half: 8 gpm–30 gpm), from 352 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 22 50–100 ft 226 100–150 ft 140 150–200 ft 36 200–300 ft 8 300–400 ft 2 400–600 ft 1 600+ ft 0

Who drills wells in Scotland County?

DrillerWells since 2016
ERIC SANDERSON3
LARRY WILLIFORD, JR2
BOBBY ALLRED, II2
Larry Williford Jr1
Larry Williford1
RYANN DAVID GRAHAM1
Arthur Cannady1
JONATHAN KAMIONKA1

See every driller with wells on record in Scotland County, ranked →

Get quotes from local drillers

Looking at a specific property in Scotland County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in Scotland County

Free. Goes to licensed drillers working Scotland County.

Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.