North Carolina Well Data › Stokes County
Stokes County, North Carolina: well depth, water level & drilling cost
✓ 2,113 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Stokes County address — $49
How deep are wells in Stokes County, North Carolina?
The median drilled well depth in Stokes County is 325 ft, based on 2,103 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 225 ft and 425 ft; 90% are shallower than 625 ft. Wells drilled since 2016 have a median depth of 365 ft.
How much does it cost to drill a well in Stokes County?
Applying published per-foot rates to the local median depth of 365 ft: drilling and casing alone typically runs $9,125–$23,725; a complete system including pump, pressure tank, and hookup typically runs $21,900–$36,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Stokes County?
The median static water level is 50 ft below ground surface (middle half of wells: 40 ft–60 ft), from 1,677 measurements.
How much water do wells in Stokes County produce?
The median tested yield is 13 gpm (middle half: 5 gpm–30 gpm), from 1,887 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Stokes County?
| Driller | Wells since 2016 |
|---|---|
| CHRISTOPHER BULLINS | 125 |
| GARY THOMPSON | 98 |
| Phillip Bullins | 78 |
| CAMERON BAZIN | 58 |
| DAVID BELCHER | 52 |
| RAYMOND BROWN III | 43 |
| CHRIS KING | 35 |
| Raymond Brown | 34 |
See every driller with wells on record in Stokes County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Stokes County.
Well records by ZIP code in Stokes County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Westfield (27053) — 192 wells, median 365 ft
- Walnut Cove (27052) — 123 wells, median 325 ft
- Sandy Ridge (27046) — 117 wells, median 325 ft
- King (27021) — 108 wells, median 265 ft
- Pinnacle (27043) — 106 wells, median 325 ft
- Danbury (27016) — 92 wells, median 365 ft
- Germanton (27019) — 85 wells, median 325 ft
- Pine Hall (27042) — 66 wells, median 225 ft
- Lawsonville (27022) — 58 wells, median 325 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.