North Carolina Well Data › Warren County
Warren County, North Carolina: well depth, water level & drilling cost
✓ 1,001 NC DEQ + USGS records · verified 2026-10-12
Pull every recorded well near a Warren County address — $49
How deep are wells in Warren County, North Carolina?
The median drilled well depth in Warren County is 200 ft, based on 998 wells with recorded depths in the state NC DEQ + USGS database. Half of all wells fall between 109 ft and 300 ft; 90% are shallower than 400 ft. Wells drilled since 2016 have a median depth of 220 ft.
How much does it cost to drill a well in Warren County?
Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Warren County?
The median static water level is 25 ft below ground surface (middle half of wells: 20 ft–30 ft), from 739 measurements.
How much water do wells in Warren County produce?
The median tested yield is 7 gpm (middle half: 4 gpm–15 gpm), from 838 pump tests. A typical household needs 5–10 gpm.
Drilled depth distribution
Who drills wells in Warren County?
| Driller | Wells since 2016 |
|---|---|
| JERRY BALL | 31 |
| Chauncey Leggett | 15 |
| JASON POOLE | 10 |
| Bradley Deming | 9 |
| CHAUNCEY LEGGETT | 5 |
| PHILIP R HENSLEY | 5 |
| PHILIP R. HENSLEY | 4 |
| Jerry Ball | 4 |
See every driller with wells on record in Warren County, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Warren County.
Well records by ZIP code in Warren County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Warrenton (27589) — 124 wells, median 180 ft
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.