⟁ North Carolina Well Data field records · 2026 survey

North Carolina Well Data › Moore County › Eagle Springs (27242)

Eagle Springs, NC (27242): well depth, water level & drilling cost

✓ 106 NC DEQ + USGS records · Moore County

200 ftmedian well depth
114 ft–320 fttypical depth range
32 ftmedian static water level
10 gpmmedian yield (90 tests)

Pull every recorded well near a Eagle Springs (27242) address — $49

How deep are wells in and around Eagle Springs (27242), North Carolina?

The median drilled well depth in and around Eagle Springs (27242) is 200 ft, based on 105 wells with recorded depths in the state NC DEQ + USGS database. Half fall between 114 ft and 320 ft; 90% are shallower than 498 ft.

How much does it cost to drill a well in and around Eagle Springs (27242)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Eagle Springs (27242)?

The median static water level is 32 ft below ground surface (middle half of wells: 30 ft–50 ft), from 95 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 25 100–150 ft 13 150–200 ft 14 200–300 ft 15 300–400 ft 17 400–600 ft 14 600+ ft 7
Looking at a specific property in Eagle Springs (27242)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Eagle Springs (27242)

Free. Goes to licensed drillers working Moore County.

Part of Moore County well records.

Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.