⟁ North Carolina Well Data field records · 2026 survey

North Carolina Well Data › Alamance County › Swepsonville (27359)

Swepsonville, NC (27359): well depth, water level & drilling cost

✓ 137 NC DEQ + USGS records · Alamance County

185 ftmedian well depth
125 ft–265 fttypical depth range
30 ftmedian static water level
15 gpmmedian yield (117 tests)

Pull every recorded well near a Swepsonville (27359) address — $49

How deep are wells in and around Swepsonville (27359), North Carolina?

The median drilled well depth in and around Swepsonville (27359) is 185 ft, based on 137 wells with recorded depths in the state NC DEQ + USGS database. Half fall between 125 ft and 265 ft; 90% are shallower than 420 ft.

How much does it cost to drill a well in and around Swepsonville (27359)?

Applying published per-foot rates to the local median depth of 185 ft: drilling and casing alone typically runs $4,625–$12,025; a complete system including pump, pressure tank, and hookup typically runs $11,100–$18,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Swepsonville (27359)?

The median static water level is 30 ft below ground surface (middle half of wells: 25 ft–39 ft), from 114 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 14 100–150 ft 34 150–200 ft 29 200–300 ft 30 300–400 ft 7 400–600 ft 19 600+ ft 4
Looking at a specific property in Swepsonville (27359)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Swepsonville (27359)

Free. Goes to licensed drillers working Alamance County.

Part of Alamance County well records.

Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.