North Carolina Well Data › Johnston County › Clayton (27527)
Clayton, NC (27527): well depth, water level & drilling cost
✓ 82 NC DEQ + USGS records · Johnston County
Pull every recorded well near a Clayton (27527) address — $49
How deep are wells in and around Clayton (27527), North Carolina?
The median drilled well depth in and around Clayton (27527) is 204 ft, based on 82 wells with recorded depths in the state NC DEQ + USGS database. Half fall between 180 ft and 305 ft; 90% are shallower than 423 ft.
How much does it cost to drill a well in and around Clayton (27527)?
Applying published per-foot rates to the local median depth of 204 ft: drilling and casing alone typically runs $5,100–$13,260; a complete system including pump, pressure tank, and hookup typically runs $12,240–$20,400. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Clayton (27527)?
The median static water level is 20 ft below ground surface (middle half of wells: 20 ft–20 ft), from 71 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Johnston County.
Part of Johnston County well records.
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.