North Carolina Well Data › Onslow County › Holly Ridge (28445)
Holly Ridge, NC (28445): well depth, water level & drilling cost
✓ 79 NC DEQ + USGS records · Onslow County
Pull every recorded well near a Holly Ridge (28445) address — $49
How deep are wells in and around Holly Ridge (28445), North Carolina?
The median drilled well depth in and around Holly Ridge (28445) is 115 ft, based on 79 wells with recorded depths in the state NC DEQ + USGS database. Half fall between 98 ft and 149 ft; 90% are shallower than 176 ft.
How much does it cost to drill a well in and around Holly Ridge (28445)?
Applying published per-foot rates to the local median depth of 115 ft: drilling and casing alone typically runs $2,875–$7,475; a complete system including pump, pressure tank, and hookup typically runs $6,900–$11,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Holly Ridge (28445)?
The median static water level is 14 ft below ground surface (middle half of wells: 10 ft–20 ft), from 57 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Onslow County.
Part of Onslow County well records.
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.