North Carolina Well Data › Catawba County › Hickory (28603)
Hickory, NC (28603): well depth, water level & drilling cost
✓ 76 NC DEQ + USGS records · Catawba County
Pull every recorded well near a Hickory (28603) address — $49
How deep are wells in and around Hickory (28603), North Carolina?
The median drilled well depth in and around Hickory (28603) is 198 ft, based on 76 wells with recorded depths in the state NC DEQ + USGS database. Half fall between 87 ft and 389 ft; 90% are shallower than 505 ft.
How much does it cost to drill a well in and around Hickory (28603)?
Applying published per-foot rates to the local median depth of 198 ft: drilling and casing alone typically runs $4,950–$12,870; a complete system including pump, pressure tank, and hookup typically runs $11,880–$19,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Hickory (28603)?
The median static water level is 53 ft below ground surface (middle half of wells: 40 ft–60 ft), from 46 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Catawba County.
Part of Catawba County well records.
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.