⟁ North Carolina Well Data field records · 2026 survey

North Carolina Well Data › Madison County › Hot Springs (28743)

Hot Springs, NC (28743): well depth, water level & drilling cost

✓ 101 NC DEQ + USGS records · Madison County

325 ftmedian well depth
245 ft–485 fttypical depth range
60 ftmedian static water level
10 gpmmedian yield (92 tests)

Pull every recorded well near a Hot Springs (28743) address — $49

How deep are wells in and around Hot Springs (28743), North Carolina?

The median drilled well depth in and around Hot Springs (28743) is 325 ft, based on 101 wells with recorded depths in the state NC DEQ + USGS database. Half fall between 245 ft and 485 ft; 90% are shallower than 545 ft.

How much does it cost to drill a well in and around Hot Springs (28743)?

Applying published per-foot rates to the local median depth of 325 ft: drilling and casing alone typically runs $8,125–$21,125; a complete system including pump, pressure tank, and hookup typically runs $19,500–$32,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hot Springs (28743)?

The median static water level is 60 ft below ground surface (middle half of wells: 38 ft–80 ft), from 76 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 4 100–150 ft 5 150–200 ft 1 200–300 ft 20 300–400 ft 29 400–600 ft 32 600+ ft 9
Looking at a specific property in Hot Springs (28743)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hot Springs (28743)

Free. Goes to licensed drillers working Madison County.

Part of Madison County well records.

Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.