North Carolina Well Data › Jackson County › Whittier (28789)
Whittier, NC (28789): well depth, water level & drilling cost
✓ 122 NC DEQ + USGS records · Jackson County
Pull every recorded well near a Whittier (28789) address — $49
How deep are wells in and around Whittier (28789), North Carolina?
The median drilled well depth in and around Whittier (28789) is 353 ft, based on 122 wells with recorded depths in the state NC DEQ + USGS database. Half fall between 229 ft and 625 ft; 90% are shallower than 800 ft.
How much does it cost to drill a well in and around Whittier (28789)?
Applying published per-foot rates to the local median depth of 353 ft: drilling and casing alone typically runs $8,825–$22,945; a complete system including pump, pressure tank, and hookup typically runs $21,180–$35,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Whittier (28789)?
The median static water level is 65 ft below ground surface (middle half of wells: 40 ft–143 ft), from 86 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Jackson County.
Part of Jackson County well records.
Method: medians computed from NC DEQ + USGS records (NC DEQ GW-1 well construction records plus the USGS NWIS inventory, water-supply wells only (monitoring, recovery, injection, remediation and geothermal wells excluded; untyped legacy records kept only with a yield or 50+ ft depth), and USGS rows that duplicate a GW-1 record removed), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.